Heating Services

A few things are genuinely worth checking first. Confirm the thermostat is set to heat and above the current room temperature, and replace its batteries if it uses them. Check that the breaker for the heating system has not tripped. Check whether the filter is badly clogged, since severe restriction can shut some systems down on a safety control. If the equipment has a power switch nearby, confirm it is on. If all of that checks out and you still have no heat, that is the point to call rather than keep going.

It depends on the age of the equipment, the cost of the specific repair, and how the system has been performing overall. A single repair on a system in otherwise good condition is usually worth doing. Repeated failures on aging equipment, or one major repair on a system near the end of its service life, is where replacement starts making more sense. We will tell you what we are actually seeing and what each path would involve, rather than steering you toward the bigger job by default.

Service life varies widely by equipment type, installation quality, and how consistently the system has been maintained. That last factor is the one homeowners control. A system that has been inspected annually generally reaches the upper end of its expected range; one that has never been serviced often does not. Rather than quote a number that may not apply to your equipment, we would rather look at what you have and tell you where it actually stands.

Look at the equipment itself, usually in a basement, utility closet, attic or garage. If it blows warm air through vents and has a filter slot, it is almost certainly a forced-air system — a furnace, a heat pump or an air handler paired with one. If you have wall-mounted indoor units instead of ducted vents, that is a ductless mini-split. If you are not sure, take a photo of the equipment and its data plate and send it with your service request; we can usually identify it immediately.

Uneven heating usually comes down to airflow, and airflow problems have several possible causes: a restricted or dirty filter, blocked or closed vents, duct issues, or a system that is struggling to deliver its rated output. Sometimes it is the building rather than the equipment — an uninsulated exterior wall or an addition that was never properly tied into the system. Diagnosing it means looking at the system and the room together, which is why it is worth a visit rather than a guess.

Four Seasons Comfort Systems serves South Jersey and Southeastern Pennsylvania. If you are not certain whether you are in our area, send us your address through the contact form and we will tell you directly.